Description
Single Drive Industrial Infusion Pump.
- Syringe Sizes 50ul to 5ml
- Syringe Stroke 30mm
- 1/4-28 Screw Fittings
Specification and Parameters
- Plunger drive: Stepper motor drives screw assembly, photosensitive decoding detection lost step
- Rated stroke: 30mm（3000step）
- Linear speed: 0.005mm/s-25mm/s;
- Syringe size: 50 uL, 100 uL, 250 uL, 500 uL, 1 mL, 2.5 mL, 5 mL;
- Valve type: Standard：3 interfaces 120°valve，Customize：4 interfaces90 °valve;
- Valve plug turn time: ≤280ms（Between two adjacent opening）;
- Tube fitting: 1/4”-28UNF inner thread;
- Syringe fitting: 1/4”-28UNF inner thread.;
- Dimension(L×W×H): 110×44.4×127(mm)
- Power supply: DC 24V/1.5A
- Control resolution: 0.01mm(1 Step);
- Rated stroke running time: 1.2 S -100 Min
- Flow accuracy: error≤1%（＞30% of Maximum pump stoke）
- Flow repeatability: repeatability≤0.5%（Rated travel）
- Wetted Material: Borosilicate glass, PTFE, PCTFE
- Max pressure: 0.68Mpa
- Signal input: 2 gates TTL Level signal input drive current＞16mA)，Restart after controlling static pause instructions
- Signal output: 3-way OC gate signal output
- Communication interface: RS485/RS232
- Bit rate: 9600bps/38400bps can set
- Device parameter setting: 7 groups dial switch
- Working temperature: 15℃-40℃(determined by the PTFE of the syringe)
- Relative humidity: 20-80%（40℃）
- Weight: 1.23kg
Find out more about using our infusion pumps.
For orders of more than 25 units please contact us.
